Installation Instructions

If you are having issues installing your new product, contact us for help.

For installation assistance, please contact us at info@idoorsolutions.com or call us at (848) 480-1737.

  • Installing the Slideback is Quick and Easy for Your Convenience

    Watch the video and follow the instructions below to install your new Slideback product. Installation is easy, and the product is ready to use instantly.

    1. Make sure the tracks are clean.
    2. Install 2 inches from the end of the door.
    3. Drill in the screws.
    4. Assemble fork bracket.
    5. Mark the spot for the screws.
    6. Drill in the fork bracket.
    7. Connect the Slideback.
    8. Slip on the decorative cover.
    9. Adjust speed.
    10. Unscrew fork bracket to disable Slideback.

    Download the Installation Guide

  • Installing the Latchback is Quick and Easy for Your Convenience

    Watch the video and follow the instructions to install your new Latchback product. Installation is easy, and the product is ready to use instantly.

    1. Close door all the way.
    2. Place cardboard cutout on the door 54″ above the floor.
    3. Drill through the door with a 3/8 bit for the center hole and 7/32 bit for the other holes. Caution Make sure that the bits should not hit the glass.
    4. Connect the two handles using the included screws. Ensure the interior handle (with the disengage button) is inside. NOTE: The spacers have two functions.
    5. Slide the latch under the hook/tongue and drill the latch into the wall. Note: the latch spacers are used when the latch is too far from the hook.
    6. To disengage the Latchback, turn it to the left until you hear a click. To reengage the Latchback, push the button in the bottom left-hand corner.

    Download the Installation Guide